Please enter product name or model number you want and click OK to get the result!
X
OK
Homepage
/
Products
/
Optical Transceivers
/
SFP Transceivers
/
BIDI SFP 1.25G 40km

BIDI SFP 1.25G 40km

ZKTel SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm DFB laser (the 1550nm DFB laser) and the PIN/TIA. The module data link up to 10km in 9/125um Single-mode fiber.
imgAdvisory Message imgContacts
Tel：+86-575-88035326 E-mail：sales@zktel.com
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Product serial number
Category
SFP Transceivers
Quantity
-
+
Stock:
0
Keyword:
BIDI SFP 1.25G 40km
1
Product description
Parameters

ZKTel SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm DFB laser (the 1550nm DFB laser) and the PIN/TIA. The module data link up to 10km in 9/125um Single-mode fiber.

This transceiver meets the Small Form Pluggable (SFP) industry standard package utilizing an integral LC-BiDi optical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage by reading a built-in memory with I²C interface. The optical output can be disabled by a LVTTL logic high-level input of TX Disable, and the system also can disable the module via I²C. TX Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.

 

Product Features

 

  • BiDi SC or LC SFP Single Mode Transceiver
  • Compliant with SFP MSA and SFF-8472
  • 1310nm FP Laser for transmitter and 1550nm PIN+TIA for receiver
  • 1550nm DFB Laser for transmitter and 1310nm PIN+TIA for receiver
  • Hot-pluggable
  • Single +3.3 Power Supply
  • Complies with Telcordia (Bellcore) GR-468-CORE
  • Typical data rate 1.25Gbps
  • Maximal reach 40km
  • RoHS-6 compliance

 

Product Applications

 

  • Gigabit Ethernet
  • Fiber Channel
  • Routers, Hubs or Repeaters
We could not find any corresponding parameters, please add them to the properties table
Previous
BIDI SFP 1.25G 120km
Next
BIDI SFP 1.25G 10km

Product download

ZB535(53)4033-xxx_VerA
ZB535(53)4033-xxx_VerA
img
Categories:
Product download
File size:
826KB
2022-03-02 11:55:29
Dependent population:
All
Page up
1

Online Consultation

A good business needs more communication, we are totally ready to offer you our help with our professional product knowledge and experience.
留言应用名称：
产品表单
描述：

Related products

There is currently no content to display
Please add data record on website background.
800G QSFP-DD DR8
800G QSFP-DD DR8
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 100m of multi mode fiber. They are compliant with the QSFP-DD MSA and IEEE 802.3db.The optical transceiver is RoHS compliant.
800G QSFP-DD SR8
800G QSFP-DD SR8
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 100m of multi mode fiber. They are compliant with the QSFP-DD MSA and IEEE 802.3db.The optical transceiver is RoHS compliant.
400G QSFP112 LR4
400G QSFP112 LR4
The 400G QSFP112 LR4 Transceiver supports link lengths of up to 10km over SMF with Duplex LC connector. This transceiver is compliant with QSFP112 MSA, CMIS 5.2 Interface and 400GAUI-4 standards. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters. It is suitable for 400G ethernet and data center interconnect applications.
400G OSFP DR4
400G OSFP DR4
The transceiver modules are designed for use in 400 Gigabit Ethernet links on up to 500m of single mode fiber. They are compliant with the OSFP MSA, IEEE 802.3bs and 100G Lambda MSA.The optical transceiver is RoHS compliant.
400G OSFP SR8
400G OSFP SR8
The transceiver modules are designed for use in 400 Gigabit Ethernet links on up to 100m of Multimode fiber. They are compliant with the OSFP MSA and IEEE 802.3cd/cm.The optical transceiver is RoHS compliant.
25G BiDi SFP28 80km
25G BiDi SFP28 80km
The ZB7UT(TU)80QQ-DxL series single mode transceiver is small form factor pluggable module for duplex optical data communications. The ZB7UT(TU)80QQ-DxL module is designed for single mode fiber and operates at a nominal wavelength of 1295.56nm or 1309.14nm; the transmitter section uses a multiple quantum well EML, which is class 1 laser compliant according to International Safety Standard IEC-60825.
25G PON ONU BOSA
25G PON ONU BOSA
Product Features 1286nm cooled laser diode High sensitive APD -TIA Date rates up to 24.8832Gb/s 0~75℃ Operating temperature range SC/PC Receptacle
LC Embedded Type Fast Connector
LC Embedded Type Fast Connector
ST Embedded Type Fast Connector
ST Embedded Type Fast Connector
FC Embedded Type Fast Connector
FC Embedded Type Fast Connector
Fiber Fast Connector is used for field assembled optical fiber connector ,widely used in fiber to the home (FTTH) access optical networks,to assemble with drop cable quickly.
SC Embedded Type Fast Connector
SC Embedded Type Fast Connector
Fiber Fast Connector is used for field assembled optical fiber connector ,widely used in fiber to the home (FTTH) access optical networks,to assemble with drop cable quickly.
SC Hot melt Type Fast Connector
SC Hot melt Type Fast Connector
Fiber Fast Connector is used for field assembled optical fiber connector ,widely used in fiber to the home (FTTH) access optical networks,to assemble with drop cable quickly.
SC Through Type Fast Connector
SC Through Type Fast Connector
Fiber Fast Connector is used for field assembled optical fiber connector ,widely used in fiber to the home (FTTH) access optical networks,to assemble with drop cable quickly.
MPO/MTP Connector
MPO/MTP Connector
The MPO fiber connector use precision molded MT ferrules, together with metal guide pins and precise housing dimensions ensure fiber alignment when mating. Mass termination in combinations of 4, 8, or 12 fiber ribbon cables are available. Singlemode versions (with APC Polishing) are offered with premium low-loss or standard and multimode versions (with PC polishing) are also available. Available cable types include bare fiber ribbon and ruggedized ribbon (PVC Jacketed).
LC-LC Simplex Optic Fiber Patch Cord
LC-LC Simplex Optic Fiber Patch Cord
ZKTel's LC-LC Simplex Optic Fiber Patch Cord is TL9000 certified and ROHS compliant.
SC-SC Simplex Optic Fiber Patch Cord
SC-SC Simplex Optic Fiber Patch Cord
ZKTel's SC-SC Simplex Optic Fiber Patch Cord is TL9000 certified and ROHS compliant.
FC-FC Simplex Optic Fiber Patch Cord
FC-FC Simplex Optic Fiber Patch Cord
ZKTel's FC-FC Simplex Optic Fiber Patch Cord is TL9000 certified and ROHS compliant.
SMA
SMA
ZKTel's SMA is TL9000 certified and ROHS compliant.
SC Fiber Connector
SC Fiber Connector
The SC connector is comprised of a polymer body and use a 2.5mm diameter ceramic ferrule with either a PC or APC end-face. It is offered in MM or SM performances and different boot sizes, including 3.0mm, 2.4mm, 2.0mm, 0.9mm are available.
FC Fiber Connector
FC Fiber Connector
The FC Connector has a threaded body and use a 2.5mm diameter ceramic ferrule with either PC or APC end-face. It is offered in MM or SM performances and different boot sizes, including 3.0mm, 2.4mm, 2.0mm, 0.9mm, are available.
ST Fiber Connector
ST Fiber Connector
The ST Connector is comprised of a nickel plated brass body and use a 2.5mm diameter ceramic ferrule with PC end-face. It is offered in MM or SM performances anddifferent boot sizes, including 3.0mm, 2.4mm, 2.0mm, 0.9mm, are available.
JET Air Blown Fiber Optic Cable
JET Air Blown Fiber Optic Cable
JET Air Blown Fiber Optic Cable is 250μm singlemode or multimode fibers sleeved in a loose casing made of high-modulus material filled with a non-toxic, non-hazardous waterproof compound. In the center of the core is a non-metallic reinforcing core (FRP), loose tube (or filler rope) around the center of the reinforcing core into a compact round core. The reinforcing core is covered with a water-blocking yarn, and then extruded into a black or colored HDPE sheath.
GYFXTY Air Blown Fiber Optic Cable
GYFXTY Air Blown Fiber Optic Cable
GYFXTY Air Blown Fiber Optic Cable is a 250μm single-mode or multimode fiber sleeved into a loose casing made of high-modulus material, which is filled with non-toxic, non-hazardous waterproofing compounds. The loose tube is twisted with non-metallic reinforcing elements of aramid or high-strength glass yarn, and then extruded into a black or colored HDPE sheath.
GYFTY Air Blown Fiber Optic Cable
GYFTY Air Blown Fiber Optic Cable
GYFTY air-blown fiber optic cable structure is ф250μm optical fiber into a high-modulus material made of loose tube, loose tube filled with waterproof compounds, loose tube around the center of the reinforcing core stranded into a compact round core, in the core gap to play a role in moisture-proof waterproof yarns, and then extruded polyethylene sheath into a cable.
800G OSFP 2xFR4
800G OSFP 2xFR4
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 2km of single mode fiber. They are compliant with the OSFP MSA,IEEE 802.3cu and 100G Lambda MSA.The optical transceiver is RoHS compliant.
800G OSFP 2xLR4
800G OSFP 2xLR4
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the OSFP MSA and 100G Lambda MSA.The optical transceiver is RoHS compliant.
800G OSFP DR8++
800G OSFP DR8++
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the OSFP MSA, and IEEE 802.3cu.The optical transceiver is RoHS compliant.
800G OSFP DR8
800G OSFP DR8
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 500m of single mode fiber. They are compliant with the OSFP MSA, and IEEE 802.3bs.The optical transceiver is RoHS compliant.
800G QSFP-DD 2xLR4
800G QSFP-DD 2xLR4
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP-DD MSA and 100G Lambda MSA.The optical transceiver is RoHS compliant.
800G QSFP-DD 2xFR4
800G QSFP-DD 2xFR4
The transceiver modules are designed for use in 800 Gigabit Ethernet links on up to 2km of single mode fiber. They are compliant with the QSFP-DD MSA,IEEE 802.3cu and 100G Lambda MSA.The optical transceiver is RoHS compliant.
CATV Optical Receiver
CATV Optical Receiver
CATV Optical Receiver is designed for FTTH networks ONU side to receive the 1555nm video signal.The receiver integrates a WDM and an analog PIN photodiode. It could fit together with GPON (Gigabit Passive Optical Net) or XG(S)-PON (10Gigabit Passive Optical Net) transceiver to fulfill triple play function for FTTH networks.They are compliant with ITU-T G.984.5/G.9807.The optical transceiver is RoHS compliant.
25G ZR SFP28 80km
25G ZR SFP28 80km
The SFP28 ZR optical transceiver supports high speed serial links over single-mode optical fiber at signal rates up to 25.78Gb/s. The transmitter side of the module incorporates one 1300nm EML and CDR integrated with EML driver, and the receiver side integrated with SOA and PIN-TIA followed by Rx CDR.
GPON ONU BOSA with PWDM
GPON ONU BOSA with PWDM
GPON ONU BOSA with PWDM integrates GPON ONU BOSA and PWDM, which is designed ideal for the GPON ONU with CATV. The BOSA built-in a 1310 DFB laser transmitter and a APD or Super-TIA receiver for 1490 signal, the PD is used for CATV 1550 signal.
100G QSFP28 DR
100G QSFP28 DR
The 100G QSFP28 DR transceiver is designed for use in 100 Gigabit Ethernet links on up to 500m of single mode fiber. They are compliant with the QSFP MSA, IEEE 802.3cu and 100G lamada MSA.The optical transceiver is RoHS compliant.
100G QSFP28 FR
100G QSFP28 FR
The 100G QSFP28 FR transceiver is a single lambda short reach single-mode 100G QSFP28 optical module transceiver compatible with the 100GBase-FR specifications. It uses a single 1310nm EML laser at 1310nm with a PIN receiver. There are 4x 25G NRZ electrical channels in the interface for a total speed of 100G available on the QSFP28 interface.
100G QSFP28 ER
100G QSFP28 ER
The 100G QSFP28 ER transceiver is designed for using in 100-Gigabit Ethernet links up to 40km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA,100G Lambda 100G ER-40 and CAUI-4(no FEC).

TOP

Broaden Your Bandwidth   Expand Your World

sales@zktel.com
+86-13626888520
whatsapp
13205858391
Client messages
img

Address: No.6, Shuangyan Rd., Doumen Street, Yuecheng District. Shaoxing City, ZhejiangProv. China 312071

 

E-mail: sales@zktel.com

PF

Service hotline：

Copyright (C)  Shaoxing ZKTel Equipment Co.,LTD. 

浙ICP备13027518号-2
ZKTEL
ZKTEL
ZKTEL
ZKTEL
ZKTEL

Enterprise Mailbox

mail

Copyright (C)  Shaoxing ZKTel Equipment Co.,LTD.  All Rights Reserved.

浙ICP备13027518号-2